Menu
| Checklist for The Frame | Owner Builder Beware |
|---|---|
Before Floor Frame |
|
| Based on conversation with termite proofer, has termite proofing been done prior to floor frame? | Can't get sign off if not done. |
| Has the required Inspection been completed prior to placing the floor? | |
Floor Frame |
|
| Is the floor frame flat? | |
| Are the joists fixed tight to the bearers? | If not, irregulaties can occur at later stages that may not be able to be fixed. |
| Are the joists fixed tight to the bearers? And appropriate tiedown completed? | This will avoid squeaks in floor |
| Is underfloor insulation installed (if required)? | |
| If carpeting, has sheet flooring be fixed correctly? | Always check specs for what is needed for type of floor coverings installed, this should also be checked prior to starting framework |
| If timber, has it been evenly laid? | |
Wall Frame |
|
| If using pre-fab walls, have they been constructed to Aus Standards? | |
| If not using pre-fab walls, are studs spaced correctly as per Engineers requirements? | |
| Are the doors and windows correctly positioned? | |
| Are doors and windows correct sizes? | |
Roof trusses |
|
| If using pre-fab trusses, have they been constructed to Aus Standards? | |
| If not using pre-fab trusses are rafters and beams installed correctly? | |
Once frame is complete |
|
| Has inspection been done by Engineer? | Most frame options should be installed per Engineers plans and then inspected by your Engineer once completed. Otherwise, you won't get certification at the end of the build. |
Plumbing prior to roofing |
|
| Has plumber fitted gutters and flashing prior to roof covering? | |
| Are downpipes positioned correctly? | |
| Has plumber commenced rough in? | |
Roof cover and fascia |
|
| Has roof been fitted to manufacturers specs? | |
| Is there a guarantee for the roof? | |